Marshall Electronics V-MD702 Instructions d'exploitation télécharger pdf (Page 14)

V-MD702 Operating Instructions

Filter Configuration Submenu

■

False Colors

The V-MD702 has a false color filter to aid in the setting of camera exposure. As the camera Iris is adjusted,

elements of the image will change color based on the luminance or brightness values. This enables proper

exposure to be achieved without the use of costly, complicated external equipment. To best utilize this feature,

you must understand the color chart below and have a basic understanding of camera exposure. Normally,

when shooting subjects like people, it is common practice to set exposure of faces to the equivalent of

approximately 56 IRE. The false color filter will show this area as the color PINK on the monitor. Therefore, as

you increase exposure (open the IRIS), your subject will change color as indicated on the chart: PINK, then

GREY, then a few shades of YELLOW. Over exposed subjects (above 101 IRE) on the monitor will be shown as

RED. In addition, underexposed subjects will show as DEEP-BLUE to DARK–BLUE, with clipped-blacks

indicated with a FUCHSIA-like color. Lastly, the color GREEN is used to indicate elements of the image that are

approximately 45 IRE. This represents a ‘neutral’ or ‘mid-level’ exposure commonly used for objects (not

people).

False Color Key

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 36 37

Pas de commentaire

Marshall Electronics V-MD702 Instructions d'exploitation Page 14